+173,Ed W0YK -------- Original message --------From: George Fremin III <geo...@kkn.net> Date: 3/13/23 06:20 (GMT-08:00) To: w...@w5wz.com Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] Using ANTLION MODMIC 4 with Elecraft K3 I plug my mod mic into the back and the pinout is correct using rear panel and bias on George Fremin IIIK5TR> On Mar 13, 2023, at 6:08 AM, w...@w5wz.com wrote:> > > > Anyone using an ANTLION MODMIC 4 with an Elecraft K3?> > I'm having difficulty. The Modmic works great plugged into my PC Mic Input on the front panel.> > I believe the ModMic is electret - requiring BIAS, which I know is turned on at CONFIG > MIC > press #2, so the end result is FP.H BIAS.> > A Heil AD-1-K is plugged into the front panel; however, pin 6 (8v) is not wired to the mono 1/8 mike jack on the adapter. The Modmic uses a T-R-S 1/8 inch.> > What is the correct pinout for the K3 front mic jack to the Modmic?> > --Scott, W5WZ> ______________________________________________________________> Elecraft mailing list> Home: http://mailman.qth.net/mailman/listinfo/elecraft> Help: http://mailman.qth.net/mmfaq.htm> Post: mailto:Elecraft@mailman.qth.net> > This list hosted by: http://www.qsl.net> Please help support this email list: http://www.qsl.net/donate.html> Message delivered to geo...@kkn.net ______________________________________________________________Elecraft mailing listHome: http://mailman.qth.net/mailman/listinfo/elecraftHelp: http://mailman.qth.net/mmfaq.htmPost: mailto:elecr...@mailman.qth.netThis list hosted by: http://www.qsl.netPlease help support this email list: http://www.qsl.net/donate.htmlMessage delivered to e...@w0yk.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
