The Leo Bodnar two-channel GPSDO should give you both frequencies, although
setting them is really clunky. The promised revised software never materialized.
Wes N7WS
On 6/14/2023 11:27 AM, G4GNX wrote:
It’s true that both rigs *can* use a 10MHz reference, but the far better way to
run the IC-9700 is by using an injection board which pulls the onboard TCXO
from the GPS reference at 49.152MHz, instead of using the 10MHz input which is
only checked periodically.
The only disadvantage is that 2 different devices are required, one for
49.152MHz and one for 10MHz (for the K4).
73,
Alan - G4GNX
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
