You can determine if it's caused by RFI very easily. Try transmitting
into a dummy load.
73,
Victor, 4X6GP
Rehovot, Israel
Formerly K2VCO
CWops no. 5
http://www.qsl.net/k2vco/
On 16/06/2023 16:46, Russ Edelen wrote:
After returning from Elecraft for repair and updating my K3 (1087) will
reset it's Mic gain to 1 and Compression to zero.
I backed up the radio's configuration when I get it back and reloading
it does not solve the problem, which occurs at boot up more times then not.
This is a barefoot setup with computer logging/control feeding a 178
foot extended zepp with 450 ohm twin lead.
Is this a symptom of RFI to the radio? Anyone have any suggestions?
KG7VQ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k2vco....@gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com