Hi Allan, In your original post you said your K2 seemed somewhat 'deaf.'
Does that mean you hear no signals at all on any band, no signals on one or two bands, or just weak audio with antenna or signal generator input? Since your K2 has the K160RX option, I would check that the RX antenna is not inadvertently selected in the menu, especially if there is nothing connected to that antenna port. In your most recent post you indicated that the sudden deafness occurred after the transceiver was working fine. When you wrote that 'the power cut out and left the K2 in this state' after starting to recalibrate the ATU, can you clarify what you mean by that statement? Is there any TX power output or just not what the Power control indicates? I would recommend ceasing effort to realign the radio from scratch until the cause(s) of the abrupt loss of some functionality is (are) identified. The issue with the VFO realignment is a separate matter unless the VFO has ceased to oscillate at all. 73, Mike, K8CN ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
