I have had that problem in the past. Have you tried a 'reset configuration"?
On Thu, Aug 3, 2023 at 12:44 PM Paul Ecker <ecke...@gmail.com> wrote: > In the KAT 500 Utility – Configuration- Antennas- Band- 17M; > > I have Antenna 3 checked as Enabled and Antenna 3 as Preferred. No other > antennas are selected for 17 m. This configuration has been applied and > saved. Setup is Flex 6600, KAT500, KPA500 & win 10 pc. > > The problem I am having is: with radio on 17 M, when I run a “tune” > sequence, the KAT does not switch to Ant 3, in fact it will not let me > manually switch to ant 3. I occasionally have the same issue with the tuner > not switching on other bands, to the selected antenna as set up in the > utility. > > Any suggestions on what may be causing this ? > > > 73 Paul > > w2eck > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to wa8...@gmail.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com