Mike and Jack...
Thanks for your suggestions.
Mike, I'm not clear "where" you are implementing your macro; perhaps you
are using the K3 utility. I'd like to avoid that and interact with the
radio directly. Jack, what I'm looking for is not different drive levels
on different bands, but switching drive levels on the same band
"instantaneously." For example, I'm chasing DX and not getting through
at 100w; turn on the amp, hit the macro button, and transmit; no
adjustment. You might have noticed that the power level knob changes the
K3s power out very slowly, and I'm trying to get around that with a
macro. Thanks much. Looking forward to your replies.
...robert KE2WY
On 12/5/2023 18:35, Robert Strickland via Elecraft wrote:
Is there a way to program a macro within the K3s to set power
level(s)? My goal is to be able to shift between low power barefoot
[100w] and a drive level for the KPA500 [15-20w]. Thanks
..robert KE2WY
--
Robert G. Strickland, PhD ABPH KE2WY
rc...@verizon.net
Syracuse, New York FN13xa
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
