On 3/21/2024 3:01 PM, Carol Richards wrote:> Hello all, > > I am still having problems keying my K3S. I checked everything . The K3S is set with vox on. The key goes directly to the rear jack.
The KEY jack, not the PADDLE jack, right? > I am sure it is something dumb that I missed. Please any help out there? Is MODE set to CW? If so, and you tap XMIT, then press the key, does the K3 transmit a carrier? >From the K3's user manual troubleshooting section: "Cant transmit in CW mode: (1) Make sure the key or keyer paddle is plugged into the correct jack. (2) You must have VOX selected (VOX icon on) in order to use hit-the-key CW. (3) You may be in SPL IT mode, with VFO B set for a voice or data mode. Tap A/B or use BSE T to check VFO Bs mode." That's all I can think of. 73, Mike N4CF ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
