A 1.5 KW external wattmeter is much less expensive than a major KPA500
repair - I would not risk it.
73,
Don W3FPR
On 4/3/2024 6:15 PM, Mike Murray wrote:
If a KPA500 is in standby, can it be used to determine power output from
another amp by feeding the signal thru the KPA? I don't currently have an
external power meter I can utilize to check output of an SB200, but I also
don't want to risk damaging the KPA.
73,
Mike - W0AG
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w3fpr...@gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
