Pete I had not read about your KPA1500 issue until now. I can relate with the same problem. Very frustrating but maybe now a solution. Thanks for the follow up! I’ll let you know the results of the download.
73 Dan - NB2P “Sometimes the correct path is the most tortured one” On Thursday, April 18, 2024, 11:16 AM, Pete Smith N4ZR <pete.n...@gmail.com> wrote: Readers may recall that I had been asking for help with an intermittent problem causing my KPA-1500 to trip due to high SWR. It would happen 3-4 times in 10 minutes and then not happen again for hours. A couple of weeks ago, a local KPA-1500 owner suggested that the problem was due to a timing error in the T/R switching of the 1500, and suggested I address this by reverting to version 2.58 firmware instead of the latest release. I did so, and since then I have had not a single recurrence. If this is a known issue, I wonder why it hasn't been fixed in the later releases? -- 73, Pete N4ZR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to dcari...@yahoo.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
