Remember, the KIO2 does not use an RS-232 cable! The KIO2 requires a special cable for computer control.
Mark Saunders, KJ7BS Glendale, AZ K2 S/N 0539 ---- Per Enocson <[EMAIL PROTECTED]> wrote: ============= Back from my summer vacation, my K2/100 and PC don´t get along anymore. Everything else works fine, also the communication between the K2 and the KAT-100, although initially there was a slight trouble with the keyer (no dits or dahs,just one steady note, whichever paddle pressed). I have tried with three different PC:s and with two different cables (one built new for testing). I am convinced that the PC communication settings are correct. I have followed the troubleshooting suggestions. Any suggestion on what to do next is very much appreciated. E.g. how do I conclude if this is a hardware or a software issue? Are there any known compatibility issues between firmware 2.04 which I recently installed when doing the keying modification and the 1.06 firmware (old) of my KPA-100? Thanks Per SM0WRA K2/100 no 1623 ---------------------------------------- Jag använder gratisversionen av SPAMfighter för privata användare. 401 spam har blivit blockerade hittills. Betalande användare har inte meddelande i sin e-post. Hämta gratis SPAMfighter här: http://www.spamfighter.com/lse _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
