One item to check is the baud rate, which is only 4800 for the K2.
On 2025-04-09 19:38, Norman Eid DDS MBA via Elecraft wrote:
I am having difficulty with my PC connecting to my K2. I have checked
the
serial cable and have its orientation as specified by Elecraft. The
cable
has no opens and is wired correctly. I believe I have a software
problem
and not a hardware issue. I have my ports set as per Elecraft
recommendations and the PC will not recognize my K2. I have been
trying to
use Elecraft's remote program as well as HRD; both are not recognized.
I
have read through Elecraft threads on this issue and continue to have
no
success. I would like to get into digital work. Any suggestions?
Thanks
for the help. Norm WB0LRJ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
--
73,
-- Dave, N8SBE, Hamshack Hotline 550-0971, HamsOverIP 101018,
AmateurWire 1348
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
