Bill, I trust you are not confusing sensitivity with loudness. The K2 is designed for low receive current drain, and as such does not have a powerful audio output amplifier. Sensitivity is the ability to hear extremely weak signals, so pick the weakest signal that you can hear with the TR7 and see if the K2 can also receive that signal. You will likely find that the K2 can hear signals that the TR7 cannot.
The L34 adjustment peak is quite broad. If you cannot discern a definite peak, just set the slug 1 1/2 turns in from the top of the can. 73, Don W3FPR > -----Original Message----- > Well, I made it through Part II and the rig hears! Had one IC in > backwards > (duh) but got it out and back in OK. Two questions: > > 1. I really can't hear much of a peak, if any when I adjust L34. I am > hearing impaired and wear two hearing aids so maybe it's me? > > 2. I hear signals but sensitivity is quite below my TR7 after > adjusting L1 > and L2, is this normal with full sensitivity expected after final > alignment? > _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
