I hadn't used my KX3 in over 6 mo. When I hooked it up, it operated perfect in SSB and CW. When I went to TX in digital modes like FT-8 or PSK-31, it would trigger the rig but there was no power out. My setup is: KX3, KPA100, Dell computer, Windows 10 and a ROCCAT soundcard. . This setup has always worked as it should in the past.Here is what I have tested: - I tested with my K3 using the same setup as the KX3 and it operated perfectly. - I switched computers while using the KX3 and had the same problem. - The issue persisted regardless of whether I was using the KPA100 or not.. - I used the calibration tool in the utility and it tested successful. - I've adjusted the soundcard volume which always worked to adjust the ALC and it had no effect. I'm thinking the issue is with the KX3 but have no idea where. Any thoughts on how to fix? My frustration level is through the roof. Thanks,Jim W7JHR
Sent from Yahoo Mail. Get the app ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
