Hi Jim
If you mean in config, then yes I did.  I get no errors or other indication
that something is wrong.  Rx noise similar to main rx that responds like I
expect with the rf gain and volume.

Thanks.
Curt
KU8L

On Wed, Nov 5, 2025, 9:31 AM Jim Rhodes <[email protected]> wrote:

> You did turn the sub on in the menu, right?
>
> Jim K0XU
> [email protected]
>
> On Tue, Nov 4, 2025, 10:32 Curt KU8L via Elecraft <
> [email protected]> wrote:
>
>> Good Morning Folks
>> I have finally added a couple of K3 to the contest station lineup here
>> and just coming up to speed on how to use them.  Had a K2 for a while
>> but big difference!
>>
>> K3  100W, KAT3, 2m Module, Kiob, ser 00872  MCU vers 5.62  Has original
>> Synths and Sub rcvr .
>>
>> Problem is no signal thru SUB.   It appears to be working because I hear
>> normal background noise which comes up with RF gain and audio prperly
>> splits to right and left headset channels.
>>
>> I went thru getting my head around the options for SUB antenna sources
>> and after deciding  I definitely wanted to use the MAIN shared option I
>> opened the unit to check how the SUB aux antenna was connected.  Removed
>> the TMP jumper to the KAT3.
>>
>> Set config to ANT=BNC, pwr cycled, and selected BSET RX ANT is set to
>> MAIN.  My understanding is this should share the main ANT1 or ANT2
>> selection of the main rx with the SUB.
>>
>> All else looks to be in order inside but still no Signal from SUB.
>>
>> Before I remove the 2mtr unit and lift the SUB out to be sure the SUBIN
>> connections are OK looking for any other things to check. This was a kit
>> build but had sat unused for a couple years after owner went SK.  Clean
>> and looks good inside but no idea if it ever worked
>>
>> Final thought was to try replacing the TMP connect to SUB Aux and KAT3
>> and reconfig for using the non tx ant to verify the SUB operation and
>> perhaps narrow the field to looking at the SUBIN connect and the Jumper
>> W4 situation.
>>
>> Any ideas on where to go next with this?
>>
>> Thank you in advance for any advice.
>>
>> Curt
>> KU8L
>>
>>
>>
>> --
>> This email has been checked for viruses by Avast antivirus software.
>> www.avast.com
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[email protected]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [email protected]
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected] 

Reply via email to