Hi Jim, Tnx for the quick response. Yes, I used the K3 ON/OFF button (left the power supply on). Agree, that is the normal way. So I was surprised to see that only the PTT-KEY setting went back to it's previous (Default ?) state. The reason for my question.
73, Evert PA2KW / 5T2KW / W8S -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Jim Brown via Elecraft Sent: Friday, 5 December 2025 09:38 To: [email protected] Subject: Re: [Elecraft] K3 : PTT-KEY setting On 12/5/2025 12:17 AM, Evert via Elecraft wrote: > After a power cycle, all settings were as expected except the PTT-KEY > setting. It went back to OFF - OFF. HOW did you Power Off? With the K3 On/Off button? That's the right way -- the K3 saves its settings when you do that. But NOT if you kill the power supply -- when it restarts, it's with the last time you used the K3 On/Off button to turn the rig off. 73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
