> -----Original Message----- > > What would happen if you connected the K1 up to say 16 vdc? > -------------------------- Ron,
OK, I'll go out on a limb here and say that probably nothing would happen if the K1 were accidently connected to 16 volts. 20 volts create a problem but I don't believe 16 volts would matter. However, since the spec voltage range for the K1 is 15 volts on the high end, I would not vouch for long term operation at 16 volts. If you have a power supply that is developing 16 volts, put a couple of adequately high current diodes in series on the K1 power lead. 73, Don W3FPR -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.430 / Virus Database: 268.15.3/562 - Release Date: 12/1/2006 1:12 PM _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com