My K2/100 shows a lot of variation in TX output, esp. on 40 meters. I'll set it for 50 watts and the power will toggle up and down by 10's of watts. Time to change R98. Checking old posts, I see that values of 1.1 KOhm seem to be good, I have a 1K resistor so I put that in. Put the rig back together and ... Max output on 40 meters is about 3 watts. It is lower below and above 40 and on 20 or above there is no output. Hmmm, did I do bad? My next step will be to parallel another R with R98 so I can drop the resistance and see if I regain some power. Sheesh, and this is on the eve of SKN too. What a bad time for my rig to be down. - Keith N1AS - - K2 5411.ssb.100 - _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com