Is it possible to use one of the Heil mike adapters? When I go offshore I take my Heil headset in a pouch. I also have a Icom, Yaesu and Kenwood Heil adapters in the pouch. This way I can plug into any rig. If the K3 is wired as a Kenwood, can't you just use the Kenwood mike adapter? Or if your mike requires voltage on the mike, can you use one of the other Heil adapters?
N2TK, Tony -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Don Wilhelm Sent: Monday, May 14, 2007 1:41 AM To: Bernard Gaffney, N8PVZ/QRP Cc: [EMAIL PROTECTED]; elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 Mic MH2 on K2 Bernie, In that case, build an adapter. 73, Don W3FPR Bernard Gaffney, N8PVZ/QRP wrote: > Don, > > thanks for the reply. I may not have been clear in > my original Post, but what I want to do is have the > mics be interchangeable; i.e., be able to use either > mic on either rig, not just on a specific rig. Sounds > like that may not be possble, based on your reply? > > 72 de N8PVZ > ---bernie > > --- Don Wilhelm <[EMAIL PROTECTED]> wrote: > >> Bernie, >> >> It may be even easier than that - if you do not use >> the MC-60 mic on a Kenwood transceiver, then you >> can re-wire the 8 pin mic plug - just move the wire >> currently connected to pin 5 to pin 6. If >> there was something already connected to pin 6, you >> will want to remove it (and you will lose the >> function of whatever it accomplished). >> >> Since the Kenwood mic does not want a resistor >> between 5 volts and pin 1 (AF), you must install >> that resistor in the MH2 mic plug rather than >> across the mic jack inside the K2. That action will >> dedicate the MH2 mic to YOUR K2, but that may be OK >> unless you try to sell the mic. >> > > > > ____________________________________________________________________________ ________ > 8:00? 8:25? 8:40? Find a flick in no time > with the Yahoo! Search movie showtime shortcut. > http://tools.search.yahoo.com/shortcuts/#news > _______________________________________________ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > > _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com