I agree with that, my pc of choice is a Mac, so its either got to be platform independent or platform less, and I'm leaning towards the later. Let us buy the display of our choice and support most reasonable resolutions. USB K/B if you'll need one, but keypad controls on the unit would be better.
However, I wonder if what Elecraft have in mind is a Panadapter in the firmware of the K3 and use the ACC connector for a display. Or perhaps its another plug-in module with an additional connector for display? Just done see where that would fit on the back. On 22/5/07 23:10, "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> sent: > Message: 24 > Date: Tue, 22 May 2007 11:56:48 -0400 > From: "Don Nesbitt" <[EMAIL PROTECTED]> > Subject: RE: [Elecraft] SDR UI > To: "'Jack Smith'" <[EMAIL PROTECTED]>, > <elecraft@mailman.qth.net> > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset="us-ascii" > > Jack - I hope that Wayne and Eric contract with you to produce the > "panadapter" for the K3. It should have that kind of functionality as well > as at least a vertical line indicating the xcv freq and when split, both the > tx and the rx should be indicated as well. Of course, a color display with > the lines in different colors as well as a "sweep hold" function or at least > a "peak sweep delay" of some sort. The ability to hook a large flat screen > monitor would be very desirable as well. USB mouse port and no computer > required. -- Math Anxiety: an intense lifelong fear of two trains approaching each other at speeds of 60 and 80 MPH. -Rick Bayan K3 Anxiety: an intense short-term fear that your K3 will be delivered late in July instead of early! _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
