I have just completed KX1 1804. (Can't quite justify a K3 at this point but needed something to supplement the K2...) It's a great kit and I look forward to using it. There is one problem at the final checking stage. Everything seems to work as expected except I can't get the 20m output to be less than the 40m output as described in the manual. When I first checked (with a 12v supply) I got about 3.6watts on 20m and 3.1 on 40m. I adjusted the turns on L2 per the manual, but that seems to reduce output on both bands. At the most extreme 'squeeze', I got ~2.7watts on 40m and 3.1 watts on 20.
Everything else seems correct. Any suggestions greatly appreciated! Bernie W1AZ _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com