Wayne Does the use of the mouse to click imply a computer, or some uP likely to be imbedded in the Pan'r? Running TRLOG in DOS doesn't leave me with a mouse to click on things. 73, Bob N6WG
----- Original Message ----- From: "wayne burdick" <[EMAIL PROTECTED]> To: "Richard Smith" <[EMAIL PROTECTED]> Cc: "Elecraft Reflector" <elecraft@mailman.qth.net> Sent: Tuesday, October 09, 2007 9:25 AM Subject: [Elecraft] PC->K3 command responsiveness > Richard Smith wrote: > > > My first reaction without trying the program (always dangerous) is > > that needing HRD sitting between the PowerSDR GUI and the K3, and > > controlling the K3 via serial commands, will leave users with the > > feeling that software control just isn't responsive enough for real > > world uses. > > Richard, > > The K3 serial I/O port can run at up to 38.4 kb, and command response > is very fast. It can also buffer a large number of commands at full > speed and respond to them in order, error-free. To verify this, I'll > paste 10 different commands into the terminal emulator window, running > at 38.4 kb. All 10 responses appear in the terminal emulator window > immediately, with no perceptible delay. > > Yesterday there was a discussion about Panadapter responsiveness. > If/when we offer a panadapter, it will be tightly linked with the K3, > so you'll be able to do things like click on a signal and move the VFO > to it, etc. If the text decoder is turned on, CW, RTTY, and PSK31 > signals will be decoded and displayed on the K3's own LCD and/or in a > window on the panadapter. > > Of course the "P3" would match the K3's enclosure styling, too, and may > include a power supply and/or speaker. For field ops, you could take > just the K3. Either way, it's computer-optional. > > 73, > Wayne > N6KR > > _______________________________________________ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
