Hello all Well, k2 5723 is alive, but I have a few snags. First, No smoke, and about 10 watts +\- on all bands except 40m. no output on 40. Display says " high current " and shows no rf output on meter on 40 m. but I was stupid and handled a plug for the cw key over the rig without the cover. Blew the fuse on the power line when the plug dropped onto the board and I think took out one of the PA transistors, the one closest to the back of the rig. Replaced the fuse, On all other bands, I can get 5 to 6 watts MAX out on all bands except 40m. still no rf output. Also, all bands now give the hi current message on the display.
I am learning as I go here so could someone please explain how I can confirm if one of the Pa transistors is bad? Looking for suggestions and procedure. Tnx and 73 mike ku4yp _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com