I second all of these. I will be using 2 mcs too and I have an SGC I wish to tune, I'd like to be able to set the 'low rf output for tune' level as well, the SG-237 will tune on 3W.
On 28/11/07 14:59, "Don Nesbitt" <[EMAIL PROTECTED]> sent: > Maybe I'm missing something (if so, someone please straighten me out) or > maybe some of this could be placed on the "add to software someday" list. > > Front and Rear Mic Selection: > > The "bias" settings for the Front and Rear mic inputs are independent. I can > set "bias" ON for Front and OFF for rear (or visa versa) and as I switch > from front to rear mic, the bias stays where I set it for the mic selected. > > This does not seem to be true for the "H" and "L" parameter. Set Front to > "H" and rear is automatically set to "H" - set rear to "L" and front is > automatically set to "L" - this parameter (Boost) does not currently seem to > be independent. > > 1. Can this parameter setting be made to follow the selected mic input? > > TX Equalizer: > > Currently, when one sets the TX EQ for either the Front or Rear mic input, > that setting automatically applies to the other input. So if you have very > different microphones you may not only have to switch the "Boost" (that's > what the built-in "help" banner calls "H" and "L") but you also have to > readjust EQ settings. > > As an example, my K2 Proset requires very different EQ settings than my > Shure 444. One is on the front and one is on the back. It sure would be > nice to not have to readjust the EQ each time I switch mics. BTW: the 444 > works extremely well on the K3! > > 2. Can the TX EQ setting be made to follow the selected mic input? > > LOW Power Tuning: > > Having to use the rotary Power Control to reduce power for the purpose of > initially tuning up an external manual tune amplifier and pressing the > "Tune" button is cumbersome - not to mention remembering to do it! > > Some sort of scheme (menu item?) that allows one to select a "Tune" level > (set to the user's choice) would facilitate this. Maybe something like - > Push and hold Tune for 2 seconds to apply 20 watts (or the users choice), > tap to exit - or - push and hold Tune for 2 seconds to apply 20 watts, then > push and hold again for full power (what ever you actually have the Power > control set to), tap to exit. I'm sure someone creative can come up with > something better than this but you get the idea. > > 3. Can a "low power tune" function be implemented? > > Admittedly, these are "convenience" requests that simply would facilitate > what I do how I operate. I'm guessing that there may be others that would > find these options of value. -- If all is not lost, where is it? _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
