Hi Frank, I solved the problem by using one spacer at both sides, put 4 short leads from used glass diodes in the spacer, with the diffuser diode leads at the other end. Press the spacer to the diffuser and solder with as little tin as possible. Now you have 4 long leads. Mount the assembly, not putting the leads through the second set of spacers, as this will not fit. Use the other spacers to get the right distance between the first spacers and the pcb. Just hold them somewere in the middle between the extended diode leads and solder at the bottom. Then remove the second set of spacers. Worked fine with me.
Best 73, Gerard PA1GP ----- Original Message ----- From: "cfd" <[EMAIL PROTECTED]> To: <elecraft@mailman.qth.net> Sent: Sunday, January 13, 2008 1:57 PM Subject: [Elecraft] k2 diffuser > > I'm having a problem with d2 and d3 leads on the diffuser(very short) even > a > replacement one..The leads just make it thru one spacer..the only way I > see > a fix is using a solder bridge or try to extend the leads?Anyone come > across > this? > Thanks > Frank > _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
