I will echo what was already mentioned. Your measurements are about the same as what I get on my K1. 15 meters has always been a bit lower than the other bands.
One other thing I have noticed is that the power readout on the K1 is not linear across the bands. I checked mine with a fairly accurate QRP wattmeter. If you align the power meter on the K1 so that it accurately measures 5 watts on 40 meters, it will read a little high on 15 meters and visa-versa. I set mine to be spot-on at 20 meters and it is close enough now on all the bands. Have fun! John, WA6L [EMAIL PROTECTED] wrote: > > Hi folks: > Just finished a 4-band k1, and thought I had low power out on all bands. > Turns out the cable from rig to meter was open on the ground side (a > cable Xperts cord). At 5 W requested, I now get 5 w on 20, 30, and 40 > meters, and about 4-4.5 on 15. A 7 watts requested (the maximum on the > menu), I get approximately 7 on all bands but 15, where I get 6W. Is > this normal for a K1, or should I do some tweaking somewhere (where?). > > By the way, my 'ol K2 3854 just logged its 101st country at 5 W on a 65' > carolina wondom. > > 73, Ted WB3AVD > > > _______________________________________________ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > > -- View this message in context: http://www.nabble.com/K1-power-output-question-tp15143589p15145270.html Sent from the Elecraft mailing list archive at Nabble.com. _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com