You must first enable the "Tech MD" menu item. Config ==> Tech MD ==> use VFO A to set it to ON ==> now use VFO B to locate TUN PWR ==> use VFO A to set power ==> tap MEMU -- Done.
Now when you Push and hold XMIT to get to the TUNE function, it will provide the power you set - while there, you can now increase the power with the PWR control to continue tuning up your amp at higher power. When you are finished, the next "TUNE" will be reset to the default that you set earlier. Very handy! 73 es gud dxing -- Don N4HH K3 #83 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Don Ehrlich Sent: Tuesday, January 29, 2008 7:44 PM To: elecraft@mailman.qth.net Subject: [Elecraft] K3 Firmware Update Have downloaded 1.65 / 1.52 and cannot find the Menu item for setting Tune power (TUN PWR) as advertized in the release notes. Don K7FJ K3 195 _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.19.15/1249 - Release Date: 1/29/2008 9:51 AM _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com