The Auto-Spot function performs best when the filter is narrow. I find no problems when the filter is set at 500 Hz. It also works in PSK but not (yet) for FSK.
------------------------- 73, Greg - AB7R Whidbey Island WA NA-065 K3#0009 On Fri Feb 15 5:46 , [EMAIL PROTECTED] sent: >Hi Charles, > >You might want to try [EMAIL PROTECTED]> (or >[EMAIL PROTECTED]>) for numbers one and two. > > >Concerning #1) Do you have NR turned on when you hear the bursts? >There was a problem with this several firmware revisions ago. > > >Concerning #2) Here in Europe I have not noticed anything like this, >and there are medium and short wave transmitters roughly 4 to 5 miles >from our club station, where I usually have my K3. Are you sure that >these products are being produced in your K3 and, for example, not by >oxidized connectors or the like? > > >> Do not know how to adjust the manual notch. > >It's in the manual, page 24: Hold MAN to adjust the manual notch frequency >using VFO B. This also selects manual notch. > > >> Auto SPOT seems not to work every time > >My experience is, if a signal is not strong enough or if there is more >than one signal audible then it does have problems auto-tuning. > > >vy 73 de toby > >_______________________________________________ >Elecraft mailing list >Post to: Elecraft@mailman.qth.net >You must be a subscriber to post to the list. >Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > >Help: http://mailman.qth.net/subscribers.htm >Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com