At 21:25:23 EST on Sat 23 Feb 2008 Don Wilhelm (W3FPR) wrote ...
... If you only want to add the KSB2 and the KAT2, then just order the
Rework eliminator parts for the KSB2 (the KAT2 does not need any). ...
--
Although there are isn't a KAT2 "un-module", you will have to remove the
lower rear panel / heatsink to install P6 (the Aux RF plug) on the RF board
prior to installing the KAT2 option. For an additional 90 cents you can
obtain this plug from us and install it during the initial build to avoid
this disassembly. Otherwise, there's a chance that the PA thermal pads will
be damaged and need to be replaced.
73,
Gary KI4GGX
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
