Hi all,
Having done the upgrade this morning I thought I would test via my XV144
on FM. It would appear that the transverter is shutting down for some
reason after a short over. I have to change bands back and forward
again to switch the transverter back on. My initial thought is heat but
touching the area of the transverter PA, it is pleasantly warm but
certainly not hot. I have tried altering the XVn PWR setting to L0.5mW
but the same thing happens. It would also appear that I cannot vary the
power output using the PWR control on the K3. The menu info in the
manual says I can but not how to do it.
Any ideas please as the transverter works really well otherwise and I
get good audio reports through the repeater.
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
