I have excactly the same problem, also awaiting an answer
Ian J Maude wrote: > > OK, I was waiting to see if the firmware sorted this but it has not. If > I hold tune or use a key, I get full output power on my external meter. > On SSB I get about 40-50W showing on peaks for a setting of 120W. This > is the same whether into my trusty old Sommercamp YP-150Z or via the > Bird into a Termaline. It is also exactly the same into a tuned > dipole. This is also with the TXG VCE set to +3dB! > If I connect the 101Z or another radio into these meters, no problemo. > So can anyone tell me what I am doing wrong? I use a Goldline in the > front connector and currently it is on front panel high with a mic gain > of 10 and compression of 15. That kicks up the ALC just fine. > The K3 is #455 with the stock 2.7kHz filter with FRQ set to -0.91 as per > the label on the filter and no gain. > > Ideas please?? > > 73 Ian > > -- > > Ian J Maude, G0VGS > SysOp GB7MBC DX Cluster > Member RSGB, GQRP > K2 #4044 |K3 #455 > > _______________________________________________ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > > -- View this message in context: http://www.nabble.com/K3%3A-SSB-output-power-tp17046091p17047045.html Sent from the Elecraft mailing list archive at Nabble.com. _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com