No, I don't have the KAT3 installed, but it sounds as if it might be the same sort of thing.
Thanks anyway, perhaps it won't happen again! 73 Stephen On 29/05/2008 16:54, "Phil & Debbie Salas" <[EMAIL PROTECTED]> wrote: > "I was on 30m cw, swr about 1.1 when suddenly I noticed my output drop from > 100W to about 40W and the swr had risen to 4 or so." > > Do you have a KAT3 installed? Doesn't matter if it was bypassed or not. > Several of us have had similar problems. In my case, this occurred on 20 > meters, and then again on 30 meters. And while the SWR wound up recovering > OK on those bands, I wound up with a residual SWR on 17-10 meters that would > not go away - and I only resolved this by having the KAT3 replaced. > > I bring this up each time someone reports something similar, as I believe > there is something here that needs to be addressed. > > Phil - AD5X > > _______________________________________________ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
