Rodger: If you haven't resolved this, please save your K3 configuration (using the save button on the K3 Utility program's "configuration" tab) and attach the resulting .k3config file in an e-mail to me. I can look at the filter configuration you have and make a recommendation. I'm going to Portland for a hamfest this weekend, but will be able to look when I return on Sunday.
I suspect that you need to set FL1 "off", or set its bandwidth to zero in the K3 Utility configure crystal filter page. I'd recommend using the K3 Utility's crystal filter configuration page to review your settings. Most of us have something in the FL1 slot so we don't encounter this. But it should be possible to configure the rig with an empty FL1 slot. 73 de Dick, K6KR -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Friday, August 01, 2008 7:26 AM To: elecraft@mailman.qth.net Subject: [Elecraft] Firmware glitch on Xtal Filter selection? I recently completed my K3 #1318 and updated to the latest firmware. On another post to this group I recall someone (Dr. Garland?) asking about the same issue I am seeing on my rig. I have set up xtal filters as follows FL1 - open but assigned to FM (FM filter back ordered) FL2 2.7 kHz, FL3 1.8 kHz, FL4&5 empty. I have set up the filter receive assignments per mode and the TX filter assignments as per the manual. Here is what I am experiencing. Any time I go into the config menu for any changes(and maybe the main menu as well - can't recall) when I come out of the menu the filter auto selection during DSP bandwidth changes acts odd (In SSB mode for sure, I haven't noticed other modes). i.e. selecting a DSP bandwidth wider than 2.7 kHz now selects the FL1 position which is empty! Receiver goes dead! If I simply press the band up or down button and try this again the rig now performs correctly and ignores FL1 that is not assigned to SSB or CW etc. All remains well until I! ! go into the Config menu again??? Rodger N4NRW _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
