Phil,
In the ST-L menu you can choose for a pin of an IC that generates the tone.
It is on page 55 of the KPA100 manual.
73 's Steef PA2A
K2 4654
K3 1184
----- Original Message -----
From: "Phil and Christina" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Tuesday, August 12, 2008 6:11 AM
Subject: [Elecraft] Problem with K2 Spot function, etc.
I have K2 s/n 4635 which has given me good service since I built it. About
a month ago, I started using a 6 meter transverter (XV50) that I built.
That works well with the K2. However, since then I have had two
occurrences
of a problem. The first time I fixed it (not sure how) or it cleared
itself. The second occurrence is happening now.
The most noticeable symptom is that the SPOT function does not work. In
addition, TUNE seems a bit sluggish to turn on and there is no tone with
it.
A few of the other buttons may be sluggish too. This happens with the
transverter out of the line (straight HF K2). What should I look for?
Thank you.
73,
Phil Shepard
NS7P
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
