I'm building a KAT2, which I haven't done for a while. I noticed two things:
1) The capacitor supplied for C60, 1000 pf, is way too fat to fit
between J4 and the microprocessor socket. Either a smaller capacitor
should be supplied (I used one from my junkbox) or it should be mounted
on the bottom of the board.
2) The manual says to put the lockwasher between the board and the
standoff when assembling the control board. But when attaching the LC
board it says
"Secure the L–C board to the Control board standoffs using two 4-40
screws and two #4 split lock washers. These lock washers go between the
standoffs and the PC board, *not* between the PC board and screws as on
the control board."
Well, which is it?
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
