On Wed, 17 Sep 2008, Bill W5WVO wrote:
Actually, looking at transmission line SWR at the transmitter is a
poor way to adjust an antenna. To get it right, you need to use a
complex impedance analyzer like the now-ubiquitous MFJ-259B (or
equivalant instrument), and put it as close to the antenna
feedpoint as possible. Adjust as close as you can get for Xc=0,
Xl=0, R=50. You can't do that with an SWR bridge! :-)
Alternately, feeding through one or more half-waves of coax will give
you good accuracy while letting you get far enough away from the antenna
to not affect the measurement.
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com