Don,
Thanks for your thorough response! In thinking that through and then
going back to read about calibration of the KAT2 I realized what I had
done wrong :-( I had not commanded the KAT2 to re-tune into the dummy
load! It was still set for whatever it needed to match my antenna
system!! After that dawned on me and I re-tuned the KAT2, the WM-1 and
the K2 agreed as exactly as I can read the meter at 5 w. For some
reason, the WM-2 (even though re-calibrated and double checked) is still
off about 20%. But those are close enough readings for my purposes!!
Back to setting up the SW-40+! This is my therapy while I anxiously
await delivery of my K3, probably near the end of November!!
Tnx es 73,
Randy, KS4L
K2 #337
K3 on order!
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
