It measures very close here as well.  

Even though the power calibrations had been done previously (this 
was the factory built s/n 622), I did need to do the wattmeter and 
power level calibrations again at both 5 and 50 watts before the 
AM carrier power was within the 22-25 watt range across the spectrum.
Without the recalibration I saw 30 watts on 160, 25 on 20 and 45 on 
10 meters. 

73, 

   ... Joe, W4TV 
 
  

> -----Original Message-----
> From: [EMAIL PROTECTED] 
> [mailto:[EMAIL PROTECTED] On Behalf Of wayne burdick
> Sent: Saturday, October 25, 2008 11:40 AM
> To: Dave G4AON
> Cc: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] K3 Beta firmware rev. 2.57
> 
> 
> We measured very close to 25 W here, but I'll look into it.
> 
> tnx
> Wayne
> 
> On Oct 25, 2008, at 12:51 AM, Dave G4AON wrote:
> 
> > Wayne, the AM power level in this version only seems to produce a
> > carrier of 10 Watts when the requested power is "100W". 
> While I don't 
> > agree with the idea of calling the power anything other than the 
> > carrier level, i.e. I would expect the power control to only go to 
> > about 30 Watts on AM, 10 Watts is only 1/3rd of the carrier power a 
> > 100 W nominal transceiver should produce.
> >
> > Back to the drawing board?
> >
> > 73 Dave, G4AON
> > K3/100 #80
> > ==========================================
> >
> > * MORE ACCURATE AM-MODE POWER LEVEL. Also slightly higher 
> modulation 
> > percentage.
> >
> >
> >
> >
> 
> ---
> 
> http://www.elecraft.com
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft@mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply via email to