I have had that setup for about 3 weeks now. Works great. Only
connections I have is the Key Out connected to the amp. Tx from the
rig to RF In on the amp. I set the Tx Delay for 20 mS. I originally
had this set for 15 mS, but on SSB the mic for the K3 was picking up
the relay kicking in. So I changed it to 20 ms and has been working
FB. Been breaking pileups left and right. Not to mention running
during CW SS. The combination works great. Can you tell I am pleased?
David Wilburn
NM4M
http://www.nm4m.com
Jim - W6VAR wrote:
K6LRG will be operating my K3 with an AL-811 provided by AF6JG for the SB SS.
Has anyone used this combination that can provide some recomendations for
setup and configuration or cautions that I should be aware of?
Thanks,
Jim
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
