Deeply apologize if this has been covered but I've not seen it in the 10
or 15 messages I've read on this topic but can recorded audio be fed
back out the TX pipe?

On Sun, 2008-12-07 at 12:49 -0800, lyle johnson wrote:
> > 1.    How many seconds of recording.
> 
> TX MEMORIES
> 
> Each transmit memory is up to 15 seconds in length.
> 
> There are eight (8) memories, arranged as two (2) banks of four (4), just 
> like 
> the CW and Data memories.
> 
> RX MEMORY
> 
> There is a 90 second "endless loop".  New recordings are appended to the 
> nests 
> audio in the loop, and the oldest is earased as more audio is added.
> 
> > 2.    It is stated that "recording starts at the beginning of available 
> > space each time it is started, and will stop at the end if not terminated 
> > sooner".  This would imply that memory is not divided equally between 
> > M1-M4 but is dynamically available, depending upon the length of the prior 
> > recordings.
> > 3.    How is memory erased.
> 
> In the case of the TX memories, record something new.  It might be extremely 
> short (44 milliseconds).
> 
> In the case of the Rx loop, you don't erase it, you just record over old 
> audio.
> 
> > 4.    I assume that if recorded received audio on playback is heard on the 
> > K3 speaker/phones it can also be sent to line out to enable archive on a 
> > PC.
> 
> I make the same assumption :-)
> 
> The DVR Rx palyback audio substitutes for the main receiver audio just prior 
> to the AF GAIN control so you can adjust its level on playback.  It is also 
> routed to LINE OUT.
> 
> 73,
> 
> Lyle KK7P
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft@mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply via email to