I would be also very interested in the interface you will use for band switching of the 2KL. I use an AT500 tuner and I'd like to do the bandswitching from the K3, but i couldn't find any decoders in the web.
73 de Roland, DC1RS Ron N9RC wrote: > > I use the K3 with a 2KL. I have the parts for auto band switching (decade > band info convertor) but have yet to build it. The max power setting I > use is 25 watts for 500 watts out but have to watch the K3 power closely. > The 2KL trips out easily when over driven and depending on band, mode and > antenna SWR (worst case 1.5:1) I have to reduce the K3 power to as much as > 12 watts to avoid trips. I believe the K3 "may" have a power spike on > first sylable that causes some of the trips. I do not use ALC but as > things settle I may try it. I use the MFJ 600 watt auto tuner with the > 2KL and generally it works quite well. I was not happy with a AT-500 I > had. > > Ron, N9RC > > > -- View this message in context: http://n2.nabble.com/K3-and-IC--2KL--negative-voltage-modification-tp1617415p1660062.html Sent from the Elecraft mailing list archive at Nabble.com. _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com