Weird.... Had the VOX gain at 60, changed it to 40 and it's OK now. Set
it to 100 and it's still OK.
What's weird is that there was no mic connected when it was acting up. I
had also unplugged everything except 12V power and a dummy load and it
failed every time.
Seems that simply changing VOX gain did the trick.
It's not 4/1/2009 already is it???
73 all Bill N2BC
----- Original Message -----
From: "Greg" <a...@cablespeed.com>
To: "Bill Coleman N2BC" <n...@stny.rr.com>; "K2MK" <k...@comcast.net>;
<jp...@jeffnet.org>; "Elecraft Reflector" <elecraft@mailman.qth.net>
Sent: Friday, December 26, 2008 12:50 PM
Subject: Re: [Elecraft] Re: Transmit when switching from DATA to AM mode?
How high is your VOX setting?
----- Original Message -----
From: "Bill Coleman N2BC" <n...@stny.rr.com>
To: "K2MK" <k...@comcast.net>; <jp...@jeffnet.org>; "Elecraft Reflector"
<elecraft@mailman.qth.net>
Sent: Friday, December 26, 2008 7:08 AM
Subject: Re: [Elecraft] Re: Transmit when switching from DATA to AM mode?
S/N 00929 /w FW 2.76, 6.0 kHz filter. Confirmed TX on switch from DATA
to
AM when VOX on. Getting typical AM carrier output for about 1 second.
Happens from either front panel mode change or PC control (two different
programs).
Happens from DATA to AM and DATAR to AM (I tried all combinations xx to
AM
via PC control).
Also occurs /w 6.0 kHz filter disabled, and on any band.
I THINK I spotted ERR ??? once on VFO B display but vy intermittent -
could
(should) not have been END as I was mid-point on all the bands.
This has been around a long time... I went back to FW 1.96 (oldest I
have) &
it happens there!
73, Bill N2BC
----- Original Message -----
From: "K2MK" <k...@comcast.net>
To: <jp...@jeffnet.org>; "Elecraft Reflector" <elecraft@mailman.qth.net>
Sent: Friday, December 26, 2008 8:25 AM
Subject: [Elecraft] Re: Transmit when switching from DATA to AM mode?
Hi Joe:
Consider the possibility of it being the software program you are
running
on your PC in DATA mode. Quit the program first then switch to AM.
It's frequently a safe bet to blame the computer for anything that goes
wrong.
73,
Mike K2MK
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.176 / Virus Database: 270.10.0/1864 - Release Date:
12/25/2008 9:40 AM
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
