I used a number of external speech processors with mobile radios to increase
their punch. My design (2 x 9 Mhz filters), design by DF4ZS and and old one
by MFJ.  It was hard to get good boosts because an extrnal processor is
outside the ALC loop creating extra distortions and filters in many
processors (including DF4ZS) are poor. 715 uses 2 inexpensive ceramic
filters with a BW of 4 Khz.  K3 with its processor + an equalizer is a
killer DX machine. Just crank it up. 

Ignacy


Lyle Johnson wrote:
> 
>> ...I don't know the details of the K3 implementation,
>> but the spec sheet refers to "compression".
> 
> In SSB modes, the K3 performs clipping at the 15 kHz IF, then bandpass 
> filters the result. It is further filtered by the 8.215 MHz IF quartz 
> filter.
> 
> Thus, the SSB speech processor used in the K3 is IF envelope clipping. 
> It is preceded by a 8-band equalizer, so the radio can be adjusted for 
> from natural sounding, though "punchy" to just plain awful if you wish 
> it to be :-)
> 
> 73,
> 
> Lyle KK7P
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> 

-- 
View this message in context: 
http://n2.nabble.com/OT%3A-RF-Clipper-%22works-with-Elecraft%22-tp2276805p2279028.html
Sent from the Elecraft mailing list archive at Nabble.com.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to