Jeff, When reading Crystal Config from K3 utility, i've remarked that the configuration between USB an LSB was exactly reversed. In my case, it's like the "ALT" button were ignored. As i use mostly USB for digital modes, (i prefer this mode as DATA A), i set manually many times my 5 filters ON. For LSB, only 2k8, 2k7 and 1k8 are selected. With selection of the remaining 0k4 and 0k25 always in LSB mode and writing the new configuration to the K3, USB is now ok with 5 filters, also after a manually power down.
I've no explanation for this behavior, it's as if "ALT" button status were ignored? (always in my case!) The good point is that i've now the correct filters configuration for USB! 73 QRO fr Rudolf, HB9ARI Jeff Wandling W7BRS wrote: > I notice something similar, I think. If this is a FAQ, I don't recall. > > On power up, NR is always off even though I had turned the K3 off with NR > on. > > Between shutdowns, it persists NB, but not NR. I don't understand why. > Same with Notch settings. Those settings seem to not persist between > shutdowns. It just seems to work the way it works. It may be the way > Eric and Wayne like it. I don't know. > > If it's already documented somewhere which settings are persisted between > shutdowns and which are not, then I withdraw the observation. > > If it's not documented in the manual which settings are persisted between > shutdowns and which are not, then it may be helpful to explain that. And > as a bonus perhaps explain the rationale for that design. > > Running MCU 2.67 > > -jeff > > > On Fri, 6 Feb 2009, hb9ari wrote: > > >> Hello, >> >> After choosing the filters used for each mode with >> the FLx ON command, settings are lost when i power >> OFF my K3. >> >> What i'm doing wrong? >> >> Thank you for your help. >> >> 73 QRO fr Rudolf, HB9ARI >> >> PS K3 #1212 uC 02.78 Filters: >> FL1 2k8 >> FL2 2k7 (original) >> FL3 1k8 >> FL4 0k4 >> FL5 0k25 >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
