Hi Jim, I use a SteppIR with my K3 successfully by setting the baud rate to 4800. Same for the K2.
73, Dick, W0NTA Jim Spears wrote: > > I recently replaced Icom stuff with a K3. Now I am trying to get all the > stuff in the shack that is supposed to communicate with each other to do > so. > Right now I am working on the K3 to SteppIR interface. > > > > I have a clone of the SteppIR "S13" cable and the K3 is connected directly > to the SteppIR "Data In" port. The SteppIR interface is set to "KENW" at > 9600 bps; the K3 RS232 is set to 9600 bps. SteppIR does not follow band > changes. > > > > Anyone got a suggestion for getting this interface to work? > > > > Jim > > N1NK > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- View this message in context: http://n2.nabble.com/K3-to-SteppIR-interface-communication-tp2298144p2298335.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html