Ron D'Eau Claire wrote:
>
> Bill Wrote:
>
> 6. The 12V Sense mod can be done by removing the 4 screws holding the fan
> assembly and letting it drop enough to give you access to install the
> diode
> on the KPA3.
>
> The procedure above is NOT AUTHORIZED by Elecraft and you
> shouldn't
> attempt it unless you have the proper equipment (a thin ESD-safe soldering
> iron like the CSI/Hakko 936, good lighting, magnifying visor, ESD work
> surface, etc) and soldering experience. But it worked for me and might be
> of some help to others. Proceed at your own risk!
>
> ---------------------------
>
> Surely Bill was referring one of the other procedures he noted.
>
> The 12V Sense mod *recommends* only removing the fan panel assembly. No
> further disassembly is needed.
>
Yes my caveat was for "all of the above". :-)
73, Bill
--
View this message in context:
http://n2.nabble.com/K3-Mods---Unauthorized-Shortcuts-tp2337168p2337487.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
