>> What has anyone found out about tuning in a PSK signal that may not be >> covered in the manual? > > Be sure you have the selectivity tightened up around the signal of > interest before you do the SPOT to auto-tune it. Might take two or > three presses. Go to FINE TUNE (1 Hz steps) if necessary.
To clarify, once I have the PSK signal identified, I narrow the selectivity to 50Hz and, if necessary, manually use 1 Hz fine tuning after AutoSPOT. I find AutoSPOT usually does just fine, though it might take 2 or 3 presses of the button to get it just right. WIDTH and QRM dictate what needs ot be done, and experience using it will tell you what steps to take. The K3 PSK decoder is not a wideband, waterfall-style decoder. It will only work properly if there is one and only one signal in the passband. 73, Lyle KK7P ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html