I seem to recall another post where someone said the line out level for the sub rx was considerably below the main RX line out level. Couldn't find it in a NABBLE search.
Using firmware version 2.82 now. Also line out = phones. Normal listening levels on main have the AF gain at about 9 o'clock. To get similar line out levels on the same signal from the sub requires about 2 o'clock settings. I can't recall having compared these levels before. May have shot myself if the foot here. Installed the leaded line out resistors yesterday. Despite checking it 6 times, there could be a wiring error. Before opening up the box again, I thought I'd check here first. I might add that historically I've had problems with line out from the sub-rx. One fix was to replace the stereo radio shack plug with another. It could also be that the jack on the I/O board is flakey. 73 de Brian/K3KO ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html