Although I don't recall seeing anything about it on here, the latest KRX3 Errata Sheet C-6, dated 3 March 2009 refers to the cutting of two tracks on the main RF board to "ensure D-A converters always receive the proper signal level".
I have yet to do this mod on my K3. 73 David In a recent message, Dave G4AON <[email protected]> writes > >I have now done all the hardware mods to my K3, none were particularly >difficult to do. I even did modifications that are of no use to me, such >as the -ve ALC and "pull up" resistor mods... At least my K3 is close to >the same mod state as the current production units. The AF amplifier >(replacement RF choke feeding the audio amp) did not seem to make any >difference at my station, I am using a pair of HiFi bookshelf speakers. >Likewise the line out mod didn't appear to make any difference, although >for the most part I run Amtor or Pactor rather than sound card data modes. > >There is no real reason to not do these mods, they have no unwanted side >effects and may in fact be of benefit. -- David G4DMP Leeds, England, UK ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
