Thanks for the quick response Arie.  I tried upgrading
my firmware from 2.67 to 2.78 but I'm still seeing the
same results. (RF meter remains at 0 when transmitting)

- Bill


Arie Kleingeld PA3A-2 wrote:
> 
> Bill,
> 
> Had the same thing once.
> Reloaded the firmware and that solved the problem here.
> 
> 73
> Arie PA3A
> 
> -----Oorspronkelijk bericht-----
> Van: elecraft-boun...@mailman.qth.net
> [mailto:elecraft-boun...@mailman.qth.net] Namens KB1PXD
> Verzonden: zondag 22 maart 2009 15:07
> Aan: elecraft@mailman.qth.net
> Onderwerp: [Elecraft] [K3] No Power Output
> 
> 
> 
> Hello everyone,
> as of last evening, my K3 is no longer indicating any
> power output on the RF meter during transmit.  I've
> tried both PTT and VOX, as well as 2 different antennas. (dipole & beam)
> When selecting "ATU TUNE", I see the RF meter go to 5W as expected, but
> the SWR indicator above only displays "- -".  I've gone through all the
> settings and they look correct.  The PWR knob is fully clockwise, I'm
> not in test mode, etc., etc.  I've sent an email to Elecraft but I
> thought I'd check here as well to see if anyone has 
> seen this behavior.  
> 
> Thanks,
> - Bill
> KB1PXD
> -- 
> View this message in context:
> http://n2.nabble.com/No-Power-Output-tp2517063p2517063.html
> Sent from the [K3] mailing list archive at Nabble.com.
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> 

-- 
View this message in context: 
http://n2.nabble.com/No-Power-Output-tp2517063p2517202.html
Sent from the [K3] mailing list archive at Nabble.com.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to