Mike, Make sure the line out from the K3 is plugged into the line input of your sound card. On most computers, red is the mic input, green is line output and blue is line input. Or if they have stencils by them, the one with and ear and arrow pointing in.
Click on programs, then accessories, then entertainment and select volume control. In volume control, click options in the upper left, then select properties. In the section labeled "adjust volume for...." select record. Below is the section "Show the following volumes controls", make sure line input is checked and click OK. The next window that pops up will be the recoding sliders, make sure line input has the "select" box checked and set the slider half way up. Now you can run sound recorder located back in programs, accessories, entertainment and the recoding will be of the line input. Hope this helps, Terry ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html